Isolant pour ITE Th31 en PSE gris épaisseur 100 mm - 3,60m²/paquet
Ref. COUZ7280
Prix :
13,18 € TTC
Description
The Ø80 mm 72° galvanised elbow allows the direction of a duct or downpipe to be changed whilst ensuring excellent continuity of the system. Its galvanised finish guarantees good corrosion resistance and a long service life.
Technical specifications
| Reference : | COUZ7280 |
| Diameter : | 80 mm |
| Angle : | 72° |
| Subject : | Galvanised steel |
| Finish : | Galvanised |
| Corrosion resistance : | Yes |
| Usage : | Ventilation, extraction, technical systems |
| Installation : | Interlocking |
| Usage : | Indoors and outdoors under cover |
Rainwater downpipes
Ventilation systems
Service ducts
Drainage systems
Metal ducts
New builds
Refurbishment
You will also need:
The Europliages Ø100 mm galvanised pipe clamp provides a reliable means of securing pipework, ducts and technical systems. Made from galvanised steel, it offers excellent mechanical strength and good corrosion resistance when used indoors or under cover.
The Ø80 mm M7/M8 galvanised clamp is designed to securely fasten pipes, conduits and service ducts. Made from galvanised steel, it offers excellent mechanical strength and good protection against corrosion.
The Ø100 mm 72° galvanised elbow allows the direction of a duct or downpipe to be changed whilst ensuring excellent continuity of the system. Its galvanised finish guarantees good resistance to corrosion and a long service life.
The Ø80 mm 72° galvanised elbow is designed to provide a reliable change of direction in small-diameter rainwater downpipes, ventilation systems and metal ducts. Made from galvanised steel, it offers good mechanical strength and effective protection against corrosion. Its 72° angle allows the downpipe route to be easily adjusted whilst ensuring the continuity of the system, particularly when removing and re-installing downpipes on a facade with external insulation.
With a diameter of 80 mm, this elbow is the logical choice for a small-diameter rainwater downpipe. Please check that the diameter is compatible with your pipes and clamps before ordering, as this is a common mistake on renovation sites.
Products in the same category:
The ITE mesh, with a 4×4 mm mesh size and a weight of 160 g/m², is a CSTB-certified fibreglass reinforcement designed to strengthen the base layer of external thermal insulation systems. Sold in rolls measuring 1,000 mm x 50 m (50 m²), it offers a tighter mesh and a higher weight per square metre than the standard mesh.
Its CSTB certification makes it the preferred solution for external thermal insulation systems requiring reinforced mesh, particularly in areas most exposed to mechanical stress.
This 203 mm aluminium profile enables the construction of energy-efficient external wall insulation systems using thick insulation.
The Siniat Unimat Façade Ultra BD panel, 100 mm thick, is a rigid, graphite-modified (grey) expanded polystyrene insulation board, ACERMI-certified, designed for external wall insulation (EWI) beneath render. Measuring 1200 x 600 mm, it has a thermal resistance of R = 3.20 m².K/W thanks to its thermal conductivity of 0.031 W/(m.K).
Lightweight and easy to cut, this panel is installed by gluing and/or fixing with dowels to masonry and concrete, in both new-build and energy-efficient renovation projects.
The Siniat Unimat Façade Ultra BD panel, 20 mm thick, is a rigid, graphite-modified expanded polystyrene (grey) insulation board, ACERMI-certified, designed for external wall insulation (EWI) beneath render. Measuring 1200 x 600 mm, it has a thermal resistance of R = 0.60 m².K/W thanks to its thermal conductivity of 0.031 W/(m.K).
Lightweight and easy to cut, this panel is installed by gluing and/or fixing with dowels to masonry and concrete, in both new-build and energy-efficient renovation projects.
The Siniat Unimat Façade Ultra BD panel, 50 mm thick, is a rigid graphite-modified expanded polystyrene (grey) insulation board, ACERMI-certified, designed for external wall insulation (EWI) beneath render. Measuring 1200 x 600 mm, it has a thermal resistance of R = 1.60 m².K/W thanks to its thermal conductivity of 0.031 W/(m.K).
Lightweight and easy to cut, this panel is installed by gluing and/or fixing with dowels to masonry and concrete, in both new-build and energy-efficient renovation projects.
The galvanised steel elbow offers better mechanical strength and superior weather resistance compared to a PVC elbow, which is more susceptible to UV damage and impact over the long term.
The galvanised 80 72° elbow versus a PVC elbow
Durability High Average, susceptible to UV
Mechanical strength Good More vulnerable to impact
Compatibility Galvanised systems PVC systems only
Appearance Traditional metallic Plain, coloured
Isoler une façade
Fixer un isolant
Protéger / finir une ITE
Rénover un mur extérieur
Préparer un support
Traiter l'humidité façade
Gérer les points singuliers
Fixations
Colles & mortiers
Rails & profilés
Enduits & revêtements
Étanchéité / traitement façade
Accessoires ITE
Outillage ITE
ITE laine de roche
ITE polystyrène (PSE)
ITE fibre de bois
Espace PRO
Aide et contact
Votre compte
Panneaux isolants ITE
Laine de roche
Polystyrène expansé (PSE)
Fibre de bois
Systèmes complets ITE
ITE laine de roche
ITE polystyrène
ITE fibre de bois
Chevilles pour isolant extérieur
Rosaces de fixation
Vis ITE
Kits de fixation
Enduits façade
Enduit de base
Enduit de finition
Accessoires de finition
Trames / armatures
Bandes de renfort
Revêtements / peintures façade
Solutions ITE rénovation
Produits compatibles rénovation
Traitement support (primaire, sous-couche)
Nettoyage & traitement façade
Réparation du support
Primaires & accroches
Hydrofuges façade
Traitement remontées capillaires
Traitement anti-moisissures / salpêtre
Revêtements étanches façade
Angles façade
Tours de fenêtres & ouvertures
Jonctions & raccords
Départs & bas de façade
Chevilles ITE
Rosaces
Vis isolant extérieur
Kits de fixation
Colle pour isolant ITE
Mortier-colle
Sous-enduits
Rails de départ
Profilés d'angle
Profilés de finition
Profilés de goutte d'eau
Bavette / rejingots
Enduits de base
Enduits de finition
Crépis
Peintures façade
Sous-enduit ITE
Primaires d'accroche
Hydrofuges façade
Produits anti-humidité
Profilés de goutte d'eau
Bavette / rejingots
Trames fibre de verre
Bandes
Accessoires divers
Taloches
Outils de coupe
Mélangeurs
Panneaux
FIxations compatibles
Enduits compatibles
Systèmes complets
Colles compatibles
Panneaux PSE
Accessoires
Enduits compatibles
Systèmes complets
Colles compatibles
Panneaux
Fixations spécifiques
Enduits compatibles
Systèmes complets
Colles compatibles
