Catégories
Adhesives and mortars, renders and coatings, fixings, rails and profiles, accessories, waterproofing and façade treatment: browse the Centrale ITE catalogue by product category. All external thermal insulation materials, certified and fully documented, at trade prices for both private individuals and professionals.
The 100 mm aluminium top rail is a protective profile designed to cover and protect the upper edge of insulation panels where this is not covered by a roof overhang. Designed for insulation thicknesses of 100 mm, it is sold in lengths of 2.5 m.
Made from aluminium, its teardrop shape ensures effective drainage of rainwater, thereby providing long-lasting protection for the external thermal insulation system.
The 10×23 PVC external thermal insulation corner bead is an alkali-resistant, pre-fabricated PVC profile designed to reinforce and protect external corners in external thermal insulation systems. Sold in 2.5 m lengths, it incorporates a fibreglass mesh for secure anchoring in the render.
Easy to install in fresh undercoat render, it ensures a clean finish to corners whilst preventing the formation of cracks and mechanical damage.
The 10×75 mm screw-in wooden hinge with a Ø10 mm pin is a hardware fitting designed for securing swing shutters to wooden frames. Its 10 mm diameter, 75 mm long wood-threaded shank ensures a secure hold, whilst its 10 mm pin fits the corresponding shutter hinges.
This hinge is particularly used for re-fixing shutters on externally insulated façades, in conjunction with the wedges and blocks designed for fixing façade fittings.
The 10×75 mm screw-in wooden hinge with a Ø14 mm pin is a hardware fitting designed for securing swing shutters to wooden frames. Its 10 mm diameter, 75 mm long wood-threaded shank ensures a secure hold, whilst its 14 mm pin fits the corresponding shutter hinges.
This hinge is particularly used for re-fitting shutters on externally insulated façades, alongside the wedges and blocks designed for fixing façade fittings.
The 10×75 mm screw-in wooden hinge with a Ø16 mm pin is a hardware fitting designed for securing swing shutters to wooden frames. Its 10 mm diameter, 75 mm long wood-threaded shank ensures a secure hold, whilst its 16 mm pin fits the corresponding shutter hinges.
This hinge is particularly used for re-fixing shutters on externally insulated façades, in conjunction with the wedges and blocks designed for fixing façade fittings.
The 10×75 mm screw-in wooden hinge with an 8 mm diameter pin is a hardware fitting designed for securing swing shutters to wooden surfaces. Its 10 mm diameter, 75 mm long wood-threaded shank ensures a secure hold, whilst its black finish gives it a discreet appearance.
This hinge is particularly useful when refitting shutters on externally insulated façades, alongside the wedges and blocks designed for fixing façade fittings.
The 120 mm aluminium top rail is a protective profile designed to cover and protect the upper edge of insulation panels where this is not covered by a roof overhang. Designed for insulation thicknesses of 120 mm, it is sold in lengths of 2.5 m.
Made from aluminium, its teardrop shape ensures effective drainage of rainwater, thereby providing long-lasting protection for the external thermal insulation system.
The 120-micron black PE film is an opaque polyethylene protective film designed for use on construction and renovation sites. Supplied in 3-metre-wide rolls folded in half, it covers 150 m² and provides a watertight barrier against damp, dust and splashes.
Its black colour provides good opacity, making it suitable for use under flooring, for the temporary protection of façades or for creating flexible containment areas on site. A robust and versatile solution for building professionals.
The 140 mm aluminium coping rail is a protective profile designed to cover and protect the top edge of insulation panels where this is not covered by a roof overhang. Designed for insulation thicknesses of 140 mm, it is sold in lengths of 2.5 m.
Made from aluminium, its teardrop shape ensures effective drainage of rainwater, thereby providing long-lasting protection for the external thermal insulation system.
Designed for 140 mm insulation, this starter rail ensures stable and precise installation whilst protecting the lower part of the façade
The 160 mm aluminium top rail is a protective profile designed to cover and protect the upper edge of insulation panels where this is not covered by a roof overhang. Designed for insulation thicknesses of 160 mm, it is sold in lengths of 2.5 m.
Made from aluminium, its teardrop shape ensures effective drainage of rainwater, thereby providing long-lasting protection for the external thermal insulation system.
The 180 mm aluminium coping rail is a protective profile designed to cover and protect the top edge of insulation panels where this is not covered by a roof overhang. Designed for insulation thicknesses of 180 mm, it is sold in lengths of 2.5 m.
Made from aluminium, its teardrop shape ensures effective drainage of rainwater, thereby providing long-lasting protection for the external thermal insulation system.
The 200 mm aluminium coping rail is a protective profile designed to cover and protect the top edge of insulation panels where this is not covered by a roof overhang. Designed for insulation thicknesses of 200 mm, it is sold in lengths of 2.5 m.
Made from aluminium, its teardrop shape ensures effective drainage of rainwater, thereby providing long-lasting protection for the external thermal insulation system.
The 23 mm aluminium ITE starter rail enables an external thermal insulation project to get off to a smooth start. It ensures that thin insulation boards are held in place and aligned, whilst protecting the lower part of the façade.
The 40 mm aluminium top rail is a protective profile designed to cover and protect the upper edge of insulation panels where this is not covered by a roof overhang. Designed for insulation 40 mm thick, it is sold in lengths of 2.5 m.
Made from aluminium, its teardrop shape ensures effective drainage of rainwater, thereby providing long-lasting protection for the external thermal insulation system.
The 40-micron PE film is a lightweight polyethylene protective film, suitable for finishing work, painting and site cleaning. Supplied in 3-metre-wide rolls folded in half, it covers 150 m² and provides quick protection for large areas against dust and splashes.
Its thinness makes it a cost-effective solution for occasional, short-term protection; it is easy to unroll, cut to size and dispose of after use.
The ‘By product’ section is for those who know exactly what they’re looking for: a specific product code, an additional item for an order, or a restock for a building site. The Centrale ITE catalogue is organised into six categories:
Every product in the Centrale ITE catalogue comes with its technical documentation. This allows you to check three things before purchasing: its performance, its intended use and its compatibility with your system. The products are sourced from recognised manufacturers: Fassa Bortolo for adhesives and render, Isol France and Unimat for polystyrene, Termolan for rock wool, Gutex for wood fibre, Klimas for wall plugs, and Likov for mesh and profiles. Their performance is backed by official certificates:
Isoler une façade
Fixer un isolant
Protéger / finir une ITE
Rénover un mur extérieur
Préparer un support
Traiter l'humidité façade
Gérer les points singuliers
Fixations
Colles & mortiers
Rails & profilés
Enduits & revêtements
Étanchéité / traitement façade
Accessoires ITE
Outillage ITE
ITE laine de roche
ITE polystyrène (PSE)
ITE fibre de bois
Espace PRO
Aide et contact
Votre compte
Panneaux isolants ITE
Laine de roche
Polystyrène expansé (PSE)
Fibre de bois
Systèmes complets ITE
ITE laine de roche
ITE polystyrène
ITE fibre de bois
Chevilles pour isolant extérieur
Rosaces de fixation
Vis ITE
Kits de fixation
Enduits façade
Enduit de base
Enduit de finition
Accessoires de finition
Trames / armatures
Bandes de renfort
Revêtements / peintures façade
Solutions ITE rénovation
Produits compatibles rénovation
Traitement support (primaire, sous-couche)
Nettoyage & traitement façade
Réparation du support
Primaires & accroches
Hydrofuges façade
Traitement remontées capillaires
Traitement anti-moisissures / salpêtre
Revêtements étanches façade
Angles façade
Tours de fenêtres & ouvertures
Jonctions & raccords
Départs & bas de façade
Chevilles ITE
Rosaces
Vis isolant extérieur
Kits de fixation
Colle pour isolant ITE
Mortier-colle
Sous-enduits
Rails de départ
Profilés d'angle
Profilés de finition
Profilés de goutte d'eau
Bavette / rejingots
Enduits de base
Enduits de finition
Crépis
Peintures façade
Sous-enduit ITE
Primaires d'accroche
Hydrofuges façade
Produits anti-humidité
Profilés de goutte d'eau
Bavette / rejingots
Trames fibre de verre
Bandes
Accessoires divers
Taloches
Outils de coupe
Mélangeurs
Panneaux
FIxations compatibles
Enduits compatibles
Systèmes complets
Colles compatibles
Panneaux PSE
Accessoires
Enduits compatibles
Systèmes complets
Colles compatibles
Panneaux
Fixations spécifiques
Enduits compatibles
Systèmes complets
Colles compatibles
