Catégories

Adhesive mortar

Adhesive primers

Adhesives & mortars

Base coat

By need

By product

Corner profiles

Drip mouldings

ETICS anchors

ETICS base coat

ETICS tools

Expanded polystyrene (EPS)

Expanded polystyrene (EPS), By material

Exterior paints

External insulation anchors

External Wall Insulation Accessories

External wall insulation anchors

External Wall Insulation Tools

Fibreglass mesh

Finishing plaster

Fixing insulation

Fixing rosettes

Fixings

Insulating a façade

Insulation panels

Managing critical points

Plaster & coatings

Preparing the surface & dealing with damp

Primers & bonding agents, By product

Protecting / finishing external wall insulation

Rails & profiles

Renovating an external wall

Rock wool

Rock wool ETICS

Rosettes

Starting rails

Uncategorized

Waterproofing / façade treatment

Wood fibre

Wood fibre ETICS

Marques

Calculer votre chantier

Fixings

Fixings : solutions pour l'isolation par l'extérieur

Hammer-in anchors, helical anchors and rosettes: these mechanical fixings securely anchor the insulation to the wall and absorb wind loads on the façade. Centrale ITE offers external wall insulation (EWI) anchors with European Technical Approval, ranging from 95 to 300 mm, for concrete, brick, aerated concrete blocks and timber frames, at trade prices for both private individuals and professionals.

Réf. CHEVILLES6x40

6×40 mm hammer-in plug – Box of 50

The 6×40 mm hammer-in anchor is a quick-fix fastener comprising a nylon body and a steel screw, designed for fixing starter profiles, rails and flashings in external thermal insulation systems. It is supplied in boxes of 50.

Its reinforced flat flange ensures the screw head sits firmly against the profile, providing a quick and reliable fix to most building materials.

3,96 € TTC

3,30 € HT - TVA 20,00%

Réf. LFM10140KLIMAS

LFM 10 hammer-in anchor, 140 mm – Mechanical fixing for external thermal insulation (ITE)

The LFM 10 anchor, 140 mm in length, is a mechanical hammer-in fastener, comprising a polyethylene body and a galvanised steel nail, designed for the supplementary fixing of insulation boards in external wall insulation systems. It is certified under European Technical Assessment ETA-17/0450.

Packaged in boxes of 200 pieces by the manufacturer Klimas France, it is suitable for insulation thicknesses of up to approximately 60 mm on new substrates, and helps to counteract wind suction forces on the insulated façade.

43,44 € TTC

36,20 € HT - TVA 20,00%

Réf. LFM10160KLIMAS

LFM 10 hammer-in anchor, 160 mm – Mechanical fixing for external thermal insulation (ITE)

The LFM 10 anchor, 160 mm long, is a mechanical hammer-in fastener, comprising a polyethylene body and a galvanised steel nail, designed for the supplementary fixing of insulation boards in external wall insulation systems. It is certified under European Technical Assessment ETA-17/0450.

Packaged in boxes of 200 pieces by the manufacturer Klimas France, it is suitable for insulation thicknesses of up to approximately 80 mm on new substrates, and helps to counteract wind suction forces on the insulated façade.

48,64 € TTC

40,53 € HT - TVA 20,00%

Réf. LFM10180KLIMAS

LFM 10 hammer-in anchor, 180 mm – Mechanical fixing for external thermal insulation (ITE)

The LFM 10 anchor, 180 mm in length, is a mechanical hammer-in fastener, comprising a polyethylene body and a galvanised steel nail, designed for the supplementary fixing of insulation boards in external wall insulation systems. It is certified under European Technical Assessment ETA-17/0450.

Packaged in boxes of 200 pieces by the manufacturer Klimas France, it is suitable for insulation thicknesses of up to approximately 100 mm on new substrates, and helps to counteract wind suction forces on the insulated façade.

52,63 € TTC

43,86 € HT - TVA 20,00%

Réf. LFM10200KLIMAS

LFM 10 hammer-in anchor, 200 mm – Mechanical fixing for external wall insulation

The LFM 10 anchor, 200 mm in length, is a mechanical hammer-in fastener, comprising a polyethylene body and a galvanised steel nail, designed for the supplementary fixing of insulation boards in external wall insulation systems. It is certified under European Technical Assessment ETA-17/0450.

Packaged in cartons of 200 pieces by the manufacturer Klimas France, it is suitable for insulation thicknesses of up to approximately 120 mm on new substrates, and helps to counteract wind suction forces on the insulated façade.

55,73 € TTC

46,44 € HT - TVA 20,00%

Réf. LFM10220KLIMAS

LFM 10 hammer-in anchor, 220 mm – Mechanical fixing for external thermal insulation (ITE)

The LFM 10 anchor, 220 mm in length, is a mechanical hammer-in fastener, comprising a polyethylene body and a galvanised steel nail, designed for the supplementary fixing of insulation boards in external wall insulation systems. It is certified under European Technical Assessment ETA-17/0450.

Packaged in boxes of 100 pieces by the manufacturer Klimas France, it is suitable for insulation thicknesses of up to approximately 140 mm on new substrates, and helps to counteract wind suction forces on the insulated façade.

33,61 € TTC

28,01 € HT - TVA 20,00%

Réf. LFM10260KLIMAS

LFM 10 hammer-in anchor, 260 mm – Mechanical fixing for external wall insulation

The LFM 10 anchor, 260 mm in length, is a mechanical drive-in fastener, comprising a polyethylene body and a galvanised steel nail, designed for the supplementary fixing of insulation boards in external wall insulation systems. It is certified under European Technical Assessment ETA-17/0450.

Packaged in boxes of 100 pieces by the manufacturer Klimas France, it is suitable for insulation thicknesses of up to approximately 180 mm on new substrates, and helps to counteract wind suction forces on the insulated façade.

41,71 € TTC

34,76 € HT - TVA 20,00%

Réf. LMX08095KLIMAS

LMX8 hammer-in anchor, 95 mm – Mechanical fixing for external wall insulation, 8 mm diameter

The LMX8 anchor, 95 mm in length, is an 8 mm diameter mechanical hammer-in fastener, fitted with a metal nail, designed for the supplementary fixing of thin insulation boards in external wall insulation (EWI) systems.

Packaged in cartons of 200 pieces, it offers a smaller-diameter alternative to the LFM 10 range, suitable for applications where minimal drilling into the substrate is required.

41,71 € TTC

34,76 € HT - TVA 20,00%

Réf. PERFIX

Perfix Performance external wall insulation fixing anchor, for insulation thicknesses of 10 to 30 cm

The Perfix Performance anchor is a mechanical façade fixing designed for external thermal insulation systems (ETIS), suitable for insulation thicknesses of 10 to 30 cm and compatible with all substrate classes (A to E). Made from plastic and galvanised steel, it is supplied in cardboard boxes of 100 pieces.

Its patented design ensures efficient load transfer whilst minimising thermal bridges, providing a quick, robust and durable fixing for insulation panels.

52,80 € TTC

44,00 € HT - TVA 20,00%

Réf. WKDS085

SPIRAL 85 mm helical anchor for insulation

The SPIRAL helical anchor is a fixing designed to be screwed directly into the rigid insulation of external thermal insulation systems (ETIS), without the need for pre-drilling. Its 85 mm length allows it to secure lightweight items such as letterboxes, outdoor lighting or house numbers.

Its spiral design ensures a secure hold in the insulation whilst minimising the thermal bridge created by the fixing, providing a quick and cost-effective solution for low-load accessories on façades.

10,37 € TTC

8,64 € HT - TVA 20,00%

Réf. TD060KLIM

TD-60 PVC rosette, Ø60 mm, with cover for timber screws

The TD-60 PVC rosette is a fixing accessory designed to be used in conjunction with a timber screw to secure insulation boards to a timber frame in external thermal insulation systems. With a diameter of 60 mm, it distributes the clamping force across the insulation.

Fitted with a fold-down cover to protect the screw head, it is supplied in packs of 100, making it convenient for quickly fitting a timber-framed façade.

14,46 € TTC

12,05 € HT - TVA 20,00%

External thermal insulation anchors: role, types and certification

Anchors designed to withstand strong winds

External wall insulation (EWI) anchors complement the bonding of the insulation. They absorb wind-induced pull-out forces and hold the system in place should the bonding fail. To ensure they hold securely, they must be suited to three factors: the substrate, the insulation and its thickness. The Centrale External Wall Insulation range:

LFM 10 hammer-in anchors (Klimas), from 140 to 300 mm. They feature a galvanised steel nail and an insulated head that minimises localised thermal bridging. They are covered byETE-17/0450, which applies to all categories of substrate.
LMX8 wall plugs, in 95 and 115 mm, for thin insulation layers.
Perfix wall plugs (10 to 30 cm).
Spiral helical wall plugs, which are screwed into the insulation.
TD-60 rosettes with cover, for screw fixing to timber studs.
6 × 40 hammer-in anchors, for fixing the starter rails.

On mineral wool, a larger-diameter fixing plate is added (TDX-90 or TDX-140, as per the manufacturer’s specifications).

Produits isolation thermique par l'extérieur

Vous recherchez

BY NEED

BY PRODUCT

ETICS TOOLS

UNCATEGORIZED

Length, number and installation of external insulation anchors

The right anchor, in the right place, at the right depth

The length of an external thermal insulation (ITE) anchor is calculated as follows: thickness of the insulation + thickness of the adhesive and the existing render + anchorage depth. For the LFM-10, ETE-17/0450 specifies an anchorage depth of at least 70 mm, in a hole 10 mm in diameter and at least 75 mm deep. With approximately 10 mm of adhesive, this gives: 100 mm 180 mm 120 mm 200 mm 140 mm 220 mm 180 mm 260 mm The number of wall plugs. Allow for at least 5 wall plugs per 1200 × 600 mm panel, i.e. approximately 7 per m², positioned at least 15 cm from the edges. In areas exposed to wind and at the edge of the façade, the fixing plan set out in the Technical Approval may require more. Installation:

Fit the wall plugs after the panels have been bonded in place.
Drill into hollow bricks using a non-percussion setting to avoid breaking their internal walls.
In solid substrates, drill 10 mm deeper than the anchor and clean out the hole.
Install at temperatures between 0 °C and +40 °C.
Flush the head with the surface of the insulation, without pushing it in or allowing it to protrude.

Comment choisir son isolant extérieur ?

Étapes d'une ITE

Quelle fixation pour quel support ?

External thermal insulation anchors: role, types and certification

Getting it right: the key answers

Për një panel të vetëm me përmasa 1200 × 600 mm, është e nevojshme të5 pika fiksimi, domethënë, afërsisht 7 për metër katror, në një distancë prej të paktën 15 cm nga skajet. Ky numër rritet në seksionet e lakuara, në lartësi më të mëdha dhe në skajet e fasadës, në përputhje me specifikimet teknike të sistemit përkatësose plani i ngjitjes.

Po, izolimi termik i mureve të jashtme në atometodat, të cilat përfshijnë ngrohjen dhe ftohjenmasave. Izolimi ofron mbështetje thelbësoredhe siguron që që panelet janë pozicionuar si duhet, ndërsa lidhësit thithin forcat e gjeneruara ngadhe sigurojnë strukturorintegritet strukturor. Ankorimet instalohen pas panelët janë fiksuar në vend, por para se të derdhet themelihiqet.

Zgjidhni Kategorinë C të klasifikimit ETE (minierë e hapur ose nëntokësore) , për shembull, LFM-10; Gërmo duke përdorur një majë gërmimi panë modalitetin automatik, për të parandaluar muret e brendshme të strukturës për të parandaluar dëmtimet. Nëse forca aktuale e murit është e panjohur, kryeni një test ngarkese në vend.