LFM 10 hammer-in anchor, 260 mm – Mechanical fixing for external wall insulation

LFM 10 wall plug, 260 mm, with metal nail – Box of 100

Certified mechanical fixings to secure your external wall insulation systems

The LFM 10-260 hammer-in anchor, manufactured by Klimas France, is a mechanical fastener designed to complement the bonding of insulation boards in external thermal insulation systems. Comprising a body made of virgin polyethylene and a galvanised steel nail with a polyamide-sealed head, it minimises localised thermal conductivity at each fixing point. This anchor has been awarded European Technical Assessment ETA-17/0450, issued by the Deutsches Institut für Bautechnik, which certifies its mechanical performance on the main types of substrates found on façades: concrete, solid brick, hollow brick, aerated concrete and lightweight concrete. With a diameter of 10 mm, a 60 mm flange and an anchorage depth of 70 mm, the LFM 10-260 is suitable for insulation panels made of expanded polystyrene, extruded polystyrene or mineral wool, used in conjunction with a suitable support washer, for insulation thicknesses of up to approximately 180 mm in new-build projects. Its function is to absorb wind suction forces on the insulated façade, serving as an essential complement to the bonding of the panels, in accordance with the number of fixings per square metre specified in the thermal analysis of the external thermal insulation system (ETIS). Packaged in cardboard boxes of 100 pieces, this certified anchor is designed for façade contractors and external thermal insulation contractors, for both new-build and energy-efficient refurbishment projects.