Catégories

Adhesive mortar

Adhesive primers

Adhesives & mortars

Base coat

By need

By product

Corner profiles

Drip mouldings

ETICS anchors

ETICS base coat

ETICS tools

Expanded polystyrene (EPS)

Expanded polystyrene (EPS), By material

Exterior paints

External insulation anchors

External Wall Insulation Accessories

External wall insulation anchors

External Wall Insulation Tools

Fibreglass mesh

Finishing plaster

Fixing insulation

Fixing rosettes

Fixings

Insulating a façade

Insulation panels

Managing critical points

Plaster & coatings

Preparing the surface & dealing with damp

Primers & bonding agents, By product

Protecting / finishing external wall insulation

Rails & profiles

Renovating an external wall

Rock wool

Rock wool ETICS

Rosettes

Starting rails

Uncategorized

Waterproofing / façade treatment

Wood fibre

Wood fibre ETICS

Marques

Calculer votre chantier

External wall insulation anchors

External wall insulation anchors : solutions pour l'isolation par l'extérieur

ITE anchors mechanically secure the insulation panels to the load-bearing wall. They stabilise the façade against wind loads without creating any significant thermal bridges. Centrale ITE offers steel-nailed hammer-in anchors for external thermal insulation (ETE), helical anchors and rail anchors, ranging from 40 to 300 mm, suitable for all substrates, at trade prices for both private individuals and professionals.

Réf. CHEVILLES6x40

6×40 mm hammer-in plug – Box of 50

The 6×40 mm hammer-in anchor is a quick-fix fastener comprising a nylon body and a steel screw, designed for fixing starter profiles, rails and flashings in external thermal insulation systems. It is supplied in boxes of 50.

Its reinforced flat flange ensures the screw head sits firmly against the profile, providing a quick and reliable fix to most building materials.

3,96 € TTC

3,30 € HT - TVA 20,00%

Réf. LFM10140KLIMAS

LFM 10 hammer-in anchor, 140 mm – Mechanical fixing for external thermal insulation (ITE)

The LFM 10 anchor, 140 mm in length, is a mechanical hammer-in fastener, comprising a polyethylene body and a galvanised steel nail, designed for the supplementary fixing of insulation boards in external wall insulation systems. It is certified under European Technical Assessment ETA-17/0450.

Packaged in boxes of 200 pieces by the manufacturer Klimas France, it is suitable for insulation thicknesses of up to approximately 60 mm on new substrates, and helps to counteract wind suction forces on the insulated façade.

43,44 € TTC

36,20 € HT - TVA 20,00%

Réf. LFM10160KLIMAS

LFM 10 hammer-in anchor, 160 mm – Mechanical fixing for external thermal insulation (ITE)

The LFM 10 anchor, 160 mm long, is a mechanical hammer-in fastener, comprising a polyethylene body and a galvanised steel nail, designed for the supplementary fixing of insulation boards in external wall insulation systems. It is certified under European Technical Assessment ETA-17/0450.

Packaged in boxes of 200 pieces by the manufacturer Klimas France, it is suitable for insulation thicknesses of up to approximately 80 mm on new substrates, and helps to counteract wind suction forces on the insulated façade.

48,64 € TTC

40,53 € HT - TVA 20,00%

Réf. LFM10180KLIMAS

LFM 10 hammer-in anchor, 180 mm – Mechanical fixing for external thermal insulation (ITE)

The LFM 10 anchor, 180 mm in length, is a mechanical hammer-in fastener, comprising a polyethylene body and a galvanised steel nail, designed for the supplementary fixing of insulation boards in external wall insulation systems. It is certified under European Technical Assessment ETA-17/0450.

Packaged in boxes of 200 pieces by the manufacturer Klimas France, it is suitable for insulation thicknesses of up to approximately 100 mm on new substrates, and helps to counteract wind suction forces on the insulated façade.

52,63 € TTC

43,86 € HT - TVA 20,00%

Réf. LFM10200KLIMAS

LFM 10 hammer-in anchor, 200 mm – Mechanical fixing for external wall insulation

The LFM 10 anchor, 200 mm in length, is a mechanical hammer-in fastener, comprising a polyethylene body and a galvanised steel nail, designed for the supplementary fixing of insulation boards in external wall insulation systems. It is certified under European Technical Assessment ETA-17/0450.

Packaged in cartons of 200 pieces by the manufacturer Klimas France, it is suitable for insulation thicknesses of up to approximately 120 mm on new substrates, and helps to counteract wind suction forces on the insulated façade.

55,73 € TTC

46,44 € HT - TVA 20,00%

Réf. LFM10220KLIMAS

LFM 10 hammer-in anchor, 220 mm – Mechanical fixing for external thermal insulation (ITE)

The LFM 10 anchor, 220 mm in length, is a mechanical hammer-in fastener, comprising a polyethylene body and a galvanised steel nail, designed for the supplementary fixing of insulation boards in external wall insulation systems. It is certified under European Technical Assessment ETA-17/0450.

Packaged in boxes of 100 pieces by the manufacturer Klimas France, it is suitable for insulation thicknesses of up to approximately 140 mm on new substrates, and helps to counteract wind suction forces on the insulated façade.

33,61 € TTC

28,01 € HT - TVA 20,00%

Réf. LFM10260KLIMAS

LFM 10 hammer-in anchor, 260 mm – Mechanical fixing for external wall insulation

The LFM 10 anchor, 260 mm in length, is a mechanical drive-in fastener, comprising a polyethylene body and a galvanised steel nail, designed for the supplementary fixing of insulation boards in external wall insulation systems. It is certified under European Technical Assessment ETA-17/0450.

Packaged in boxes of 100 pieces by the manufacturer Klimas France, it is suitable for insulation thicknesses of up to approximately 180 mm on new substrates, and helps to counteract wind suction forces on the insulated façade.

41,71 € TTC

34,76 € HT - TVA 20,00%

Réf. LMX08095KLIMAS

LMX8 hammer-in anchor, 95 mm – Mechanical fixing for external wall insulation, 8 mm diameter

The LMX8 anchor, 95 mm in length, is an 8 mm diameter mechanical hammer-in fastener, fitted with a metal nail, designed for the supplementary fixing of thin insulation boards in external wall insulation (EWI) systems.

Packaged in cartons of 200 pieces, it offers a smaller-diameter alternative to the LFM 10 range, suitable for applications where minimal drilling into the substrate is required.

41,71 € TTC

34,76 € HT - TVA 20,00%

Réf. PERFIX

Perfix Performance external wall insulation fixing anchor, for insulation thicknesses of 10 to 30 cm

The Perfix Performance anchor is a mechanical façade fixing designed for external thermal insulation systems (ETIS), suitable for insulation thicknesses of 10 to 30 cm and compatible with all substrate classes (A to E). Made from plastic and galvanised steel, it is supplied in cardboard boxes of 100 pieces.

Its patented design ensures efficient load transfer whilst minimising thermal bridges, providing a quick, robust and durable fixing for insulation panels.

52,80 € TTC

44,00 € HT - TVA 20,00%

Réf. WKDS085

SPIRAL 85 mm helical anchor for insulation

The SPIRAL helical anchor is a fixing designed to be screwed directly into the rigid insulation of external thermal insulation systems (ETIS), without the need for pre-drilling. Its 85 mm length allows it to secure lightweight items such as letterboxes, outdoor lighting or house numbers.

Its spiral design ensures a secure hold in the insulation whilst minimising the thermal bridge created by the fixing, providing a quick and cost-effective solution for low-load accessories on façades.

10,37 € TTC

8,64 € HT - TVA 20,00%

Types of anchors for external thermal insulation

The right plug for every type of insulation

An external thermal insulation (ITE) anchor consists of three parts:

a rosette, the flange that holds the insulation in place;
a plastic sleeve, which expands within the wall;
a nail or screw, which secures the assembly.

Centrale ITE offers three ranges:

Steel nail-driven anchors (LFM 10, LMX8). These are the most commonly used for bonded polystyrene and rock wool. The LFM 10 combines:
- a polyethylene sleeve and a galvanised steel nail;
- a polyamide-coated head, which limits the thermal bridge to 0.004 W/K per plug when installed flush with the surface, and 0.003 W/K when recessed (ETE-17/0450);
- a range from 140 to 300 mm.
Spiral helical anchors. These are screwed into the insulation and are often used with flexible or fibrous insulation. Their suitability for your system should be checked in the relevant Technical Assessment.
6 × 40 hammer-in anchors. These are mounting anchors for fixing aluminium starter rails, with a centre-to-centre spacing of 30 to 50 cm.

When used with rock wool, the anchor is combined with a large-diameter expansion disc (90 or 140 mm), which prevents the head from sinking into the insulation.

Produits isolation thermique par l'extérieur

Vous recherchez

BY NEED

BY PRODUCT

ETICS TOOLS

UNCATEGORIZED

Selecting an external wall insulation (EWI) anchor based on the substrate and the external wall insulation system (EWIS)

Certified resistance, on a per-support basis

An ETICS anchor is selected on the basis of its European Technical Assessment (ETA). This specifies the substrates for which it is approved and the pull-out resistance it offers in each. ETE-17/0450 for the LFM-10 covers the five substrate categories: concrete (A), solid masonry (B), hollow or perforated masonry (C), lightweight concrete (D) and aerated concrete (E). Characteristic resistance values. For a single anchor, these range from approximately 0.3 kN in perforated brick to 0.9 kN in standard concrete. This is why a hollow-brick wall generally requires more anchors per square metre than a concrete wall. Installation parameters for the LFM-10:

10 mm drill bit;
hole at least 75 mm deep;
effective anchorage of at least 70 mm;
installation between 0 °C and +40 °C.

Two special cases:

On an unknown or deteriorated substrate, an on-site pull-out test determines the actual strength, in accordance with the Technical Specifications.
Recessed installation, with the head embedded in the insulation beneath a cover plate, further reduces the thermal bridge and prevents ‘anchor marks’ on the render.

Comment choisir son isolant extérieur ?

Étapes d'une ITE

Quelle fixation pour quel support ?

Types of anchors for external thermal insulation

Choosing the right anchor – how to get it right

Makineritë e montuara në shtyllë ofrojnë stabilitet më të mirë dhe janë të përshtatshme për përdorim në hapësira të mëdhastruktura, duke përfshirë elemente strukturore. Tek modelet më të fundit, si LFM 10, koka forcohet me poliamid, Urhët termike minimizohen. Fiksuesit plastikë nuk ofrojnë asgjë më të madheforcë, as izolim më të mirë.

Pak, nëse janë zgjedhur me kujdes. Blloku i furnizimit me energji LFM-10 është projektuar për montim në sipërfaqeNë këtë rast, dalja është 0.004 W/°C, ndërsa në rastin e instalimit të ngulitur, 0.003 V/°C. Rreth 7 sensorë të montuar në sipërfaqe për metër katrormetër, ndikohet nga vetitë termike të muritështë i neglizhueshëm. Sistemi i instaluar gjithashtu nuk lejon për shfaqjen e gjurmëve të çarjeve në murnë sipërfaqe.

Së pari, kontrolloni llojin e themelit: beton, muraturë e ngurtë, muraturë e zbrazët, beton i parapërgatitur ose beton i ajrosur. Më pas, kontrolloni: nëse objekti në fjalë mbulohet nga ky llojmbuloni këtë lloj. Nëse keni ndonjë pyetje në lidhje me përforcimin e murit,, testi i kompresionit në vend do të japë përgjigjen përfundimtare.