Catégories

Adhesive mortar

Adhesive primers

Adhesives & mortars

Base coat

By need

By product

Corner profiles

Drip mouldings

ETICS anchors

ETICS base coat

ETICS tools

Expanded polystyrene (EPS)

Expanded polystyrene (EPS), By material

Exterior paints

External insulation anchors

External Wall Insulation Accessories

External wall insulation anchors

External Wall Insulation Tools

Fibreglass mesh

Finishing plaster

Fixing insulation

Fixing rosettes

Fixings

Insulating a façade

Insulation panels

Managing critical points

Plaster & coatings

Preparing the surface & dealing with damp

Primers & bonding agents, By product

Protecting / finishing external wall insulation

Rails & profiles

Renovating an external wall

Rock wool

Rock wool ETICS

Rosettes

Starting rails

Uncategorized

Waterproofing / façade treatment

Wood fibre

Wood fibre ETICS

Marques

Calculer votre chantier

Rock wool

Rock wool : solutions pour l'isolation par l'extérieur

Rock wool panels for external wall insulation are non-combustible (Euroclass A1), vapour-permeable and provide effective reduction of external noise. They are the insulation of choice when fire safety, older buildings or acoustic comfort are key considerations. Centrale ITE offers ACERMI-certified panels ranging from 60 to 200 mm and fire-stop strips, at trade prices for both private individuals and professionals.

Réf. KBDRECOAT180MN

FKL Kardigan 180 mm fire barrier tape – Fire barrier for external thermal insulation cladding (ITE)

The FKL Kardigan fire barrier strip, 180 mm thick, is an ACERMI-certified rock wool fire barrier designed for external thermal insulation systems (ETIS). Measuring 1200 x 200 mm, it is integrated into the façade to limit the spread of fire through the insulated wall.

Non-combustible and compatible with the main rendered EWI systems, this strip meets the regulatory fire safety requirements applicable to buildings open to the public and to multi-occupancy dwellings.

12,65 € TTC

10,54 € HT - TVA 20,00%

Réf. 140RECOAT

RE Coat+ 140 mm rock wool panel – External wall insulation, R=4.00

The RE Coat+ rock wool panel, 140 mm thick, is a rigid, single-density insulation material with an unfinished surface, designed for external thermal insulation (ETI) beneath render. It has a thermal resistance of R = 4.00 m².K/W and is installed by bonding and/or fixing with dowels to masonry or concrete substrates.

Naturally non-combustible, this rock wool panel provides a high level of fire safety whilst offering good thermal and acoustic insulation performance, for durable façades in both new-build and energy-efficient refurbishment projects.

30,24 € TTC

25,20 € HT - TVA 20,00%

Réf. 160RECOAT

RE Coat+ 160 mm rock wool panel – External wall insulation, R=4.55

The RE Coat+ rock wool panel, 160 mm thick, is a rigid, single-density insulation material with an unfinished surface, designed for external thermal insulation (ETI) beneath render. It has a thermal resistance of R = 4.55 m².K/W and is installed by bonding and/or fixing with dowels to masonry or concrete substrates.

34,56 € TTC

28,80 € HT - TVA 20,00%

Réf. 180RECOAT

RE Coat+ 180 mm rock wool panel – External wall insulation, R=5.10

The RE Coat+ rock wool panel, 180 mm thick, is a rigid, single-density insulation material with an unfinished surface, designed for external thermal insulation (ETI) beneath render. It has a thermal resistance of R = 5.10 m².K/W and is installed by bonding and/or fixing with dowels to masonry or concrete substrates.

38,88 € TTC

32,40 € HT - TVA 20,00%

Réf. 200RECOAT

RE Coat+ 200 mm rock wool panel – External wall insulation, R=5.70

The RE Coat+ rock wool panel, 200 mm thick, is a rigid, single-density insulation material with an unfinished surface, designed for external thermal insulation (ETI) beneath render. It has a thermal resistance of R = 5.70 m².K/W and is installed by bonding and/or fixing with dowels to masonry or concrete substrates.

43,19 € TTC

35,99 € HT - TVA 20,00%

Réf. 060RECOAT

RE Coat+ 60 mm rock wool panel – External wall insulation, R=1.70

The 60 mm thick RE Coat+ rock wool panel is a rigid, single-density insulation material with an unfinished surface, designed for external thermal insulation (ETI) beneath render. It has a thermal resistance of R = 1.70 m².K/W and is installed by bonding and/or fixing with dowels to masonry or concrete substrates.

16,80 € TTC

14,00 € HT - TVA 20,00%

Réf. 080RECOAT

RE Coat+ 80 mm rock wool panel – External wall insulation, R=2.25

The RE Coat+ rock wool panel, 80 mm thick, is a rigid, single-density insulation material with an unfinished surface, designed for external thermal insulation (ETI) beneath render. It has a thermal resistance of R = 2.25 m².K/W and is installed by bonding and/or fixing with dowels to masonry or concrete substrates.

17,28 € TTC

14,40 € HT - TVA 20,00%

Réf. 020N50F

Thermolan N50F 20 mm rock wool panel – External wall insulation, R=0.50

The 20 mm-thick Thermolan N50F rock wool panel is a rigid, single-density insulation material with an unfinished surface, designed for external thermal insulation (ETI) beneath render. It has a thermal resistance of R = 0.50 m².K/W and is installed by bonding and/or fixing with dowels to masonry or concrete substrates.

7,69 € TTC

6,41 € HT - TVA 20,00%

Réf. 030N50F

Thermolan N50F 30 mm rock wool panel – External wall insulation, R=0.75

The 30 mm thick Thermolan N50F rock wool panel is a rigid, single-density insulation material with an unfinished surface, designed for external thermal insulation (ETI) beneath render. It has a thermal resistance of R = 0.75 m².K/W and is installed by bonding and/or dowelling to masonry or concrete substrates.

9,76 € TTC

8,13 € HT - TVA 20,00%

Réf. 040N50F

Thermolan N50F 40 mm rock wool panel – External wall insulation, R=1.00

The 40 mm-thick Thermolan N50F rock wool panel is a rigid, single-density insulation material with an unfinished surface, designed for external thermal insulation (ETI) beneath render. It has a thermal resistance of R = 1.00 m².K/W and is installed by bonding and/or fixing with dowels to masonry or concrete substrates.

13,01 € TTC

10,84 € HT - TVA 20,00%

Réf. 050N50F

Thermolan N50F 50 mm rock wool panel – External wall insulation, R=1.30

The Thermolan N50F rock wool panel, 50 mm thick, is a rigid, single-density insulation material with an unfinished surface, designed for external thermal insulation (ETI) beneath render. It has a thermal resistance of R = 1.30 m².K/W and is installed by bonding and/or fixing with dowels to masonry or concrete substrates.

16,26 € TTC

13,55 € HT - TVA 20,00%

Rock wool panels for external wall insulation are non-combustible (Euroclass A1), vapour-permeable and provide effective reduction of external noise. They are the insulation of choice when fire safety, older buildings or acoustic comfort are key considerations. Centrale ITE offers ACERMI-certified panels ranging from 60 to 200 mm and fire-stop strips, at trade prices for both private individuals and professionals.

Mineral insulation that is fire-resistant

Rock wool is a mineral insulation material made from molten, fibrous volcanic rock. In external wall insulation (EWI) systems, it is installed in the form of rigid panels to be rendered over, and offers three advantages that plastic insulation materials do not have: it is non-combustible, it allows the wall to breathe, and it reduces external noise. Centrale ITE’s benchmark panel is the Re Coat+ from Termolan. It is a bare, single-density panel, designed for external thermal insulation composite systems (ETICS). Its ACERMI-certified characteristics are:

thermal conductivity λD 0.035 W/m·K;
fire reaction Euroclass A1;
compressive strength CS(10)30;
perpendicular tensile strength TR7.5;
low water absorption (WS);
thickness tolerance T5.

It is available in thicknesses from 80 to 200 mm, with R-values ranging from 2.25 to 5.70, including 140 mm (R 4.00), 160 mm (R 4.55) and 180 mm (R 5.10). Thermolan N50F, available from 20 to 50 mm, is used for wall panels, window reveals and where thin thicknesses are required. Rock wool is also highly vapour-permeable (MU1, according to the Isofacade 35R certificate). On an old stone or brick wall, it allows moisture to escape to the outside.

Produits isolation thermique par l'extérieur

Vous recherchez

BY NEED

BY PRODUCT

ETICS TOOLS

UNCATEGORIZED

Installation of rock wool external wall insulation: bonding, fixing with dowels and rendering

Meticulous installation for a safe and durable façade

Rock wool external wall insulation is installed using an adhesive and dowels, with stricter requirements than for polystyrene, as the insulation is heavier and more fibrous. Installing the panels.

The panels are bonded using A 96 adhesive-plaster, a thin layer of which is worked into the surface of the panel before the adhesive is applied.
They are installed with staggered joints, starting from a starter rail.
They are fixed with steel nail plugs, combined with a large-diameter anchor plate where required by the Technical Approval Document (DTA).

The base coat. This is thicker than on EPS: the Fassatherm Plus MW technical approval specifies approximately 4.2 kg/m² for the first coat, followed by 2.1 kg/m² for the second coat, totalling approximately 6.3 kg/m², with the fibreglass mesh embedded between the two coats. The finish. To preserve the wall’s vapour permeability, a vapour-permeable finish is preferred, such as Fassil R 336 silicate render. Fire-stop strips. The Kardigan fire-stop strip (1200 × 200 mm, 180 mm thick) allows rock wool strips to be incorporated into a polystyrene external thermal insulation system (ETIS) where required by fire safety regulations. At the junctions between the two insulation layers, the reinforcement must extend at least 20 cm beyond each one.

Comment choisir son isolant extérieur ?

Étapes d'une ITE

Quelle fixation pour quel support ?

Rock wool panels for external wall insulation are non-combustible (Euroclass A1), vapour-permeable and provide effective reduction of external noise. They are the insulation of choice when fire safety, older buildings or acoustic comfort are key considerations. Centrale ITE offers ACERMI-certified panels ranging from 60 to 200 mm and fire-stop strips, at trade prices for both private individuals and professionals.

Rock wool: three questions

بەهای R بریتییە لە ٣. بۆ گەیشتن بە بەهای ٣.٧، پێویستە ئەستووریی دابڕەکە نزیکەی ١٣٠ مم بێت و بەهای λ بێتە ٠.٠٣٥ K/B. لە کردەوەدا، بۆ گەیشتن بە کاراییەکی بەرز، زۆرجار ئەستووریی ١٤٠ مم (R 4.00) یان ١٦٠ مم (R 4.55) دیاری دەکرێت، واتە ئەستووریی ١٤٠ مم (R 4.00) یان ١٦٠ مم (R 4.55). تکایە سەرنج بدەن کە پانێڵە هەڵبژێردراوەکە بڕوانامەی ACERMIی هەیە بۆ بەرگەگرتنی ئاو.

پۆلیستایرین سووکترین و گونجاوترینە لە ڕووی تێچووەوە؛ کاتێک گرافیتی تێدەکرێت، کاراییەکەی کەمێک باشتر دەبێت. ڕیشاڵەکانی کاربۆن دژەئاگرن (A1) و بەرگرییان لە ئاگردا هەیە؛ هەروەها دابڕینی دەنگی باشتر دابین دەکەن. سەبارەت بە پێداویستییەکانی سەلامەتیی ئاگر، بەکارهێنانیان پێویستە و بەتایبەتی گونجاون بۆ کارەکانی نۆژەنکردنەوە.

سەرەڕای ئەوەش، ئەگەر پانێڵەکانی Re Coat+ مەبەست لێیان گەرمیپارێزیی دەرەکی (ITE) بێت لەژێر سەقفەکەدا، بە بەراورد لەگەڵ PSE، بە چینێکی بنچینەیی ئەستوورتر دادەنرێن (نزیکەی ٦.٣ کگم/م²); ئەم چینە بە بەکارهێنانی فڵچەیەکی تەخت دادەنرێت، دواتر چینی پرایمەر (یەکەم چین)ی لێدەدرێت؛ پاشان، لە شوێنە گونجاوەکاندا، چینی سەرەوەی (تۆپ کۆت)ی بنچینە-ئاو کە بە گەرمی ڕەق دەبێت، لێدەدرێت.